Home >> News center
Gas stove carefully pick the most important automatic flameout protection device
8/3/2014 8:41:48 PM
Do not know because entering into the peak of the spring home improvement, most recently, everyone kitchen appliances for attention suddenly high up, which is a focus of the gas stove. It is also a home appliance products, including automatic flame failure safety device is particularly important, so here say a few words for reference only.
Gas stove carefully pick the most important automatic flameout protection device
Remember a long time ago we used matches the ignition days? Later a kind thing called electronic ignition. Although there is no ignition trouble, but always worried about water opened extinguish the fire we do not know, so he had to sweat squatted beside the stove stared at the pot of water. Now of course no, almost all of the high-grade gas stoves are equipped with automatic flame failure safety device.
However, this means there are also different, when you buy must pay attention. A total of three generations protective device. The first generation memory metal protection system to market around 1994. This protection system is through feature for automatic memory metal flame protection. However, it can only play a role in the fire was extinguished less than 2 minutes, the time is too long, there will be a lot of gas leaks, very dangerous.
The second generation is still on the market today thermocouple leakage protection system. Such a system is two metals with different coefficients of thermal expansion of the temperature at different sensor to sense the performance of the fire is extinguished and shut off the gas stove. Although this system has been shutdown time can be controlled at around 40 seconds, but there is still leakage risks.
The third is the most advanced ion sensing technology. Because the flame is conductive, so the ion sensing technology can be perceived by ion microprobe flame is extinguished. If you go out immediately through the solenoid valve control cut off the gas path. The reaction speed can reach tenths of a second. Such an action would not appear dangerous.
Huangcan stove
In general, gas stove stove is made of copper alloy, it is mostly yellow. Of course there are silver, those are mostly for aesthetic metal plating up. But a long time, easily oxidized color, to the time to look good.
There is the matter of the thermocouple or ion induction, they will have a stove in a metal probe vertically upwards, or ignition, or a sense of applications. From this metal head can be seen in the case of vertical quality of the product. General factory production quality of clearance products, the metal probe will be the rules vertically upward, and OEM products will be crooked up.
To ceramic stove
Stove of course very important. It's the kind generally divided into three categories: glass, stainless steel and ceramic. More beautiful glass, easy to clean. But I do not know the sales staff have not told you, glass stove allowed three thousandths fried board rate? Of course, there's fried board not explode so serious. Stainless steel stove is very beautiful and strong, but cleaning up on struggling. Brushed silver surface is very easy to dirty, still indelible. So there has been a ceramic panel products, this product has the advantages of both products before, but expensive around 200 yuan. But think of it this stove to use for many years, which is 200 yuan down do not save.
Selection tips
Since the ion-sensing technology has many features gas stove, so we can spot some tips to know the authenticity. Of course, the words on the front, where the trick is only applicable on most gas stove, there are a few exceptions also reasonable.
First, ion sensing technology is mostly automatic gas stove ignition device, which means that after pressing the switch to start the ignition (pops take blue). Stop immediately if the ignition is successful, unsuccessful continued firing stopped after 8 seconds. Semi-automatic ignition device is pressed opinions loud, doing nothing stopped. General store in the stove did not Jieqi, so you can then let go of the way by pressing the stove to know whether automatic.
In addition, the stove ignition device and flameout protection device in general ion sensing needs a section on the 1st battery powered, so this stove is usually to install two sections on the 1st battery. Ordinary stove requires only one is enough.
Gas stove carefully pick the most important automatic flameout protection device
Remember a long time ago we used matches the ignition days? Later a kind thing called electronic ignition. Although there is no ignition trouble, but always worried about water opened extinguish the fire we do not know, so he had to sweat squatted beside the stove stared at the pot of water. Now of course no, almost all of the high-grade gas stoves are equipped with automatic flame failure safety device.
However, this means there are also different, when you buy must pay attention. A total of three generations protective device. The first generation memory metal protection system to market around 1994. This protection system is through feature for automatic memory metal flame protection. However, it can only play a role in the fire was extinguished less than 2 minutes, the time is too long, there will be a lot of gas leaks, very dangerous.
The second generation is still on the market today thermocouple leakage protection system. Such a system is two metals with different coefficients of thermal expansion of the temperature at different sensor to sense the performance of the fire is extinguished and shut off the gas stove. Although this system has been shutdown time can be controlled at around 40 seconds, but there is still leakage risks.
The third is the most advanced ion sensing technology. Because the flame is conductive, so the ion sensing technology can be perceived by ion microprobe flame is extinguished. If you go out immediately through the solenoid valve control cut off the gas path. The reaction speed can reach tenths of a second. Such an action would not appear dangerous.
Huangcan stove
In general, gas stove stove is made of copper alloy, it is mostly yellow. Of course there are silver, those are mostly for aesthetic metal plating up. But a long time, easily oxidized color, to the time to look good.
There is the matter of the thermocouple or ion induction, they will have a stove in a metal probe vertically upwards, or ignition, or a sense of applications. From this metal head can be seen in the case of vertical quality of the product. General factory production quality of clearance products, the metal probe will be the rules vertically upward, and OEM products will be crooked up.
To ceramic stove
Stove of course very important. It's the kind generally divided into three categories: glass, stainless steel and ceramic. More beautiful glass, easy to clean. But I do not know the sales staff have not told you, glass stove allowed three thousandths fried board rate? Of course, there's fried board not explode so serious. Stainless steel stove is very beautiful and strong, but cleaning up on struggling. Brushed silver surface is very easy to dirty, still indelible. So there has been a ceramic panel products, this product has the advantages of both products before, but expensive around 200 yuan. But think of it this stove to use for many years, which is 200 yuan down do not save.
Selection tips
Since the ion-sensing technology has many features gas stove, so we can spot some tips to know the authenticity. Of course, the words on the front, where the trick is only applicable on most gas stove, there are a few exceptions also reasonable.
First, ion sensing technology is mostly automatic gas stove ignition device, which means that after pressing the switch to start the ignition (pops take blue). Stop immediately if the ignition is successful, unsuccessful continued firing stopped after 8 seconds. Semi-automatic ignition device is pressed opinions loud, doing nothing stopped. General store in the stove did not Jieqi, so you can then let go of the way by pressing the stove to know whether automatic.
In addition, the stove ignition device and flameout protection device in general ion sensing needs a section on the 1st battery powered, so this stove is usually to install two sections on the 1st battery. Ordinary stove requires only one is enough.
