1, the regulator metering station's daily maintenance personnel must be familiar with and comply with regulator station operation, maintenance, management, and other aspects of security technology regulations and procedures.

     2, maintenance personnel must master regulator works, characteristics and maintenance methods.

     3, according to the temperament of the cleanliness of gas, arranging maintenance cycle, such as the discovery filter pressure drop greater than the allowable value or filter regulator pressure equal to or less than the minimum pressure must be cleaned or replaced filter element to ensure the filter regulator normal.

     4, cycle checkpoint regulator station work, and timely treatment regulator failure. According to the degree of purification of gas temperament arrange maintenance cycle, regular maintenance filters, clean dirt.
Regulators should be installed in regulating metering station away from the fire, can not open the installation. Differential pressure gauge Tip:
There are three colors represent the dial above the cleanliness of the filter, the green is clean, replace or clean the filter can be yellow, red, dirty filter must be replaced;